- Active power factor correction
- Remote DC sense on +5V and +3.3V
- Short circuit protection
- Overcurrent protection
- Overvoltage protection
- Over power protection
- MTBF > 100,000 hours
- Compact size module design
- Power fault alarm signals
- Front panel LED to indicate power status
- For 90 VAC - 240 VAC full range
- Vertical and horizontal type available
|
Voltage |
90 ~ 264 VAC Full Range | ||||||||||||||
|
Frequency |
47 Hz~ 63 Hz | ||||||||||||||
| Input Current |
8 A(RMS)@ 100 VAC 4 A(RMS)@ 240 VAC | ||||||||||||||
| Inrush Current |
80 A Max for 100 VAC 12 0 Max for 240 VAC | ||||||||||||||
| Voltage | Min. Load | Max. Load | Ripple and Noise | ||||||||||||
| +5 | 2 A | 25 A | 50 mV P-P | ||||||||||||
| +12 | 2.5 A | 30 A | 120 mV P-P | ||||||||||||
| -12 |
0.1 A |
0.8 A | 120 mV P-P | ||||||||||||
| +3.3 | 2 A | 25 A | 50 mV P-P | ||||||||||||
| +5 Vsb | 0.1 A | 2 A | 50 mV P-P | ||||||||||||
|
+5 V, +12 V total current not exceed 150 W +3.3 V, +5 V, +12V total current not exceed 440 W | |||||||||||||||
| Over-voltage Protection |
+5 V output 5.7 V ~ 6.5 V +12 V output 13.3 V ~ 14.5 V +3.3 V output 3.9 V ~ 4.5 V | ||||||||||||||
| Over Circuit protection |
+5 V output 10.5 V ~ 12.5V +12 V output 25.2 V ~ 30 V +3.3 V output 6.93 V ~ 8.25 V | ||||||||||||||
| Short Circuit protection |
+3.3 V, +5 V, +12 V Shut down and latch off | ||||||||||||||
| Hold up time |
17 ms Min. | ||||||||||||||
| Efficiency |
65 % Min | ||||||||||||||
| MTBF |
100,000 hours on max load at +25 °C | ||||||||||||||
| Temperature |
Operating : 0 °C~ 50 °C Storage : -40 °C~ 70 °C | ||||||||||||||
| Dimensions |
150 x 85 x 190 (mm) | ||||||||||||||
| Output Connector |
20+4PIN ATX x1, 4PIN 12V CPU x1, HDD/CDROM x8, FDD x2, SATA x2, Buzzer Reset x1, T.T.L signal x1, LED power x1 | ||||||||||||||
Ordering Information:
ACE-R4140AP-RS 400W Mini Redundant ATX Power Supply, with PFC
ACE-R4140AP1-RS A400W AC-DC ATX Redundant module, for ACE-R4140AP, with PFC
