|
||
|
||
|
-
600 W for high power consumption RAID / multi-core system
-
High efficiency
-
ATX 2.0 standard with new 20+4 ATX power and SATA connector design
-
Overvoltage and overcurrent protection
-
100% Hi-pot tested
-
Multiple safety and EMC certifications
-
Total +12 V output up to 40 A
|
Input Voltage |
90 ~ 264 VAC Full Range | |||||
| Input Frequency |
47 ~ 63 Hz | |||||
| Input Current |
12 A(RMS)@115 VAC 6 A(RMS)@230VAC | |||||
| Inrush Current |
60 A max for 115 VAC 150 A max for 230 VAC | |||||
|
Overvoltage |
Voltage |
Min. Load | Max. Load |
Ripple & Noise |
||
| +3.3 V | 0 A | 24 A |
50mV P-P |
|||
| +5 V | 0 A | 30 A |
50mV P-P |
|||
| +12 V1 | 1 A | 12 A |
120mV P-P |
|||
| +12 V2 | 1 A | 12 A |
120mV P-P |
|||
| +12 V3 | 0.5 A | 18 A | 120mV P-P | |||
| +12 V4 | 0 A | 18 A | 120mV P-P | |||
| -12 V | 0 A |
1 A |
120mV P-P | |||
| +5 Vsb | 0 A |
2 A |
50 mV P-P |
|||
|
|
*The +5 V and + 3.3 V total output shall not exceed 160 W *Total current of +12 V1~ +12 V4 power not exceed 40 A | |||||
|
Over Voltage Protection |
+12 V : 14.6 V ±10% +5 V : 6.2 V ±10% +3.3 V : 4 V ±10% | |||||
|
Short Circuit Protection |
+3.3 V, +5 V, +12 V shut down and latch off | |||||
|
Hold Up Time |
16ms min. | |||||
| MTBF (hrs) |
100,000 hours | |||||
|
Temperature |
Operating : 0 ~ 50˚C (40 ~ 50˚C derating curve) Storage : -40 ~ 70˚C | |||||
|
Efficiency |
70 % | |||||
| Dimensions |
140X 150 X 86 (mm) 5.51 X 5.91 X 3.39 (inch) | |||||
| Outline Conector |
20+4-pin ATX x1, 4-pin 12 V CPU x1, HDD/CDROM x9, FDD x1, SATA x2 | |||||
Ordering Information:
ACE-4860AP-R11-RS 600 W AC-DC PS/2 ATX power supply, with PFC
